Start from the spec, not the product name
Oil and gas buyers rarely ask for "a coverall". They send a contractor PPE specification that names a standard, a fabric weight and sometimes a colour per company. We read the spec line by line and match each item to a product code, so your HSE team can check it against the datasheet before anything is ordered.
The lines below are the ones that come up on almost every oil and gas list we quote in the UAE, Saudi Arabia, Qatar, Kuwait, Oman and Nigeria.
Flame resistant coveralls
Most operators ask for flame resistant (FR) coveralls to EN ISO 11612, often with NFPA 2112 for flash fire and EN 1149-5 for antistatic properties in zones where a spark matters.
| Coverall | Fabric | Standards in product data |
|---|---|---|
| Tintrex BTC 4050 | 98% FR cotton, 2% antistatic, 240 GSM | EN ISO 11612, EN ISO 11611 Class 1, EN 1149-5, IEC 61482-2, NFPA 2112 |
| BSW Firewing BSW 0360 | Inherent FR modacrylic and cotton blend | EN ISO 11612, EN 1149-5 |
| Firexe BFRC 0950 | 100% cotton FR, 210-220 GSM | EN ISO 11612, EN ISO 11611 |
| TopSafe Noburn TFRC 2000 | 100% cotton FR, 200-220 GSM | EN ISO 11612, EN ISO 11611 |
If the spec says "Nomex", treat that as a fibre brand, not a standard. Send us the standard it is meant to meet and we will match it. Our guide to inherent FR versus treated FR explains the difference, and the full range is under coveralls.
Safety shoes and rigger boots
Refinery and plant work normally calls for S3: toe cap, penetration-resistant midsole and a water-resistant upper. The BFP 2064 is certified to EN ISO 20345:2022 S3 SRC with a steel toe cap and steel midsole, in sizes 38 to 47. The Stabler Ankle Plus BFP 2063 is another S3 option with a higher collar for ankle support.
Rigger boots are still common on rigs and in yards because they pull on quickly. The Border Rigger Boot BFP 2020 and BSW Rigger Boot BSW 0501 are both S1P. For wash-down areas and mud, the PVC Gumboot BFP 2900 is oil, acid and alkali resistant. It has no toe cap, so it is not a safety boot on its own. Our S1P vs S3 guide covers which rating fits which area.
Hands: impact, grip and chemicals
- Pipe handling and drill floor: Impact Resistant Gloves BIPG 8000, EN 388 4X42C with TPR back-of-hand protection and a sandy nitrile palm.
- Oily parts and general maintenance: Sandy Gloves BSW 1458 for grip, or fully coated TopSafe TNG 6004 for oil and splash.
- Sharp sheet and gratings: Cut Resistant Gloves BCRG 1457, HPPE shell with ISO 13997 level C.
Read our EN 388 rating guide if the spec quotes a four-digit code.
Head, eyes, ears and breathing
The vented BSH 1240 ratchet helmet meets EN 397 and ANSI/ISEA Z89.1 and comes in five colours, which suits crew colour codes. Pair it with EN 166 safety glasses or sealed goggles, corded BEP 3011 ear plugs (SNR 37) near compressors and generators, and N95 or KN95 masks for dusty work such as grit blasting preparation. Gas and vapour hazards need cartridge respirators chosen by your HSE team for the specific contaminant.
Shutdowns, confined spaces and work at height
Turnarounds bring a spike in harness and rescue orders. We supply EN 361 harnesses such as the BFH 0400, the BRFA 0800 retractable fall arrester with 10 m wire rope (EN 360), and for vessel and tank entry the BTP 0900 rescue tripod (EN 795) with the BRW 0910 winch (EN 1496). Order these early: harness sizes and lanyard types need confirming per crew.
For a full kit list by job, see our oil and gas PPE checklist.
How we quote oil and gas orders
Send the PPE spec or BOQ with quantities per size. The quotation lists each line with its product code and the datasheet, so it can go straight into a material submittal. Coveralls can carry your company logo and colour, and repeat orders are matched by code. Delivery within the UAE is within 24 hours; for Saudi Arabia, Qatar, Kuwait, Oman and Nigeria we confirm the route and lead time on each quotation.











