What a welder needs, head to toe
Welding PPE has to deal with spatter, radiant heat, UV, fumes, noise from grinding, and heavy steel. Fabrication shops in Musaffah, Sharjah, Al Quoz and Jebel Ali buy the same core kit every month. This page lists what we supply for each part of it.
| Hazard | PPE | From our range |
|---|---|---|
| Spatter and heat on the body | FR clothing to EN ISO 11611 | Firexe BFRC 0950, Firex work suit BFRS 0951 |
| Arc light and UV | Welding helmet with filter glass | Welding Helmet BWH 3200 |
| Hands | Long-cuff leather welding gloves | BWG 1500, BWG 1501 |
| Heavy spatter on the front | Welding apron | Welding Apron BWA 1700 |
| Falling steel | Safety shoes, S1P or S3 | Safety shoes |
| Grinding noise | Ear plugs | BEP 3011, SNR 37 |
EN ISO 11611: Class 1 or Class 2
EN ISO 11611 is the standard for protective clothing in welding and allied processes. Class 1 covers less hazardous techniques with lower levels of spatter and radiant heat, such as TIG, gas welding and low-current MIG. Class 2 covers more hazardous techniques with more spatter and heat, such as MMA (stick) welding with basic or cellulosic electrodes, MAG and high-current MIG, gouging, flame or plasma cutting, and welding overhead or in confined spaces. Check the class on the label and datasheet against the work being done.
The Firexe BFRC 0950 and TopSafe Noburn TFRC 2000 are 100% cotton FR coveralls listed to EN ISO 11611 and EN ISO 11612. The Tintrex BTC 4050 lists EN ISO 11611 Class 1 and adds EN 1149-5 antistatic and NFPA 2112. For shops that prefer two-piece workwear, the Firex Work Suit BFRS 0951 is a cotton FR shirt and trouser with triple-stitched seams.
Polyester and poly-cotton workwear melts when hot metal lands on it. Keep it out of the welding bay.
Gloves and aprons
Welding gloves need a long cuff to cover the sleeve end. We supply split leather gauntlets in several colours, such as the BWG 1500, and the green BWG 1501 and BWG 1502. TIG welders often want a thinner glove for feel. For fitting and handling before welding, use cut resistant gloves rather than welding gloves. For heavy overhead or positional work, add the BWA 1700 leather apron.
Eyes and face
The BWH 3200 is a PP welding helmet with a 105 x 50 mm filter glass window. The filter shade must suit the process and current; follow EN 169 or the shade table from your welding procedure. Grinders and helpers nearby also need eye protection: clear EN 166 safety glasses such as the BSG 0300 worn under the helmet protect against grinding sparks when the helmet is up.
Fume
Welding fume is a health hazard, not just a nuisance. Local exhaust ventilation comes first. Disposable FFP2 or N95 masks offer some protection against particulate fume in well-ventilated areas, but they are not a substitute for extraction, and stainless or galvanised work may need a higher level of protection decided by your HSE team. Our respirator guide explains the filter classes.
Feet and hearing
Fabrication yards are full of plate and offcuts. S1P is a minimum; choose S3 where floors are wet or oily. Lace covers or slip-on boots stop spatter from getting into laces. Ear plugs such as the BEP 3010 (SNR 37) belong in every grinding area.
Ordering for a workshop
Send your monthly list by product code, or tell us the number of welders, fitters and helpers and we will propose a kit. We deliver across the UAE within 24 hours and supply fabrication yards across the GCC. For oil and gas and shipyard welding, see those pages for extra items.











