Different hazards from a building site
Utility work shares the usual site hazards, but adds two that change the PPE list: electrical arc flash and work at height on poles, towers and gantries. Power and water plants add heat, noise and chemicals. This page covers what we supply for utility operators and the contractors who maintain their networks.
Arc flash and FR clothing
An electrical arc releases intense heat in a fraction of a second. Ordinary cotton or polyester can ignite or melt. Clothing for arc flash risk is tested to IEC 61482-2 (European) or rated under NFPA 70E (American), which uses arc rating categories.
The Tintrex Coverall BTC 4050 lists IEC 61482-2 and NFPA 70E CAT 2, together with EN ISO 11612, EN 1149-5 antistatic and NFPA 2112. It is 98% FR cotton with 2% antistatic fibre at 240 GSM. For plant maintenance where the main hazard is heat and flame rather than arc, the Firexe BFRC 0950 and Firex work suit BFRS 0951 are listed to EN ISO 11612 and EN ISO 11611. The FR Winter Jacket BWJ 3505 covers night shifts in the cooler months.
The arc rating needed for a task comes from your arc flash study, not from the catalogue. Send us the required category or incident energy and we will tell you which garment matches, or tell you if none of ours do.
Insulating gloves and electrical helmets
Live work needs rubber insulating gloves to EN 60903 (or ASTM D120) in the right class for the voltage, and some utilities require electrically insulating helmets. These are specialist items. Tell us the class and quantity and we will confirm what we can supply; we will not offer a general glove or helmet in their place.
Helmets, eyes and face
For general plant and network work, the BSH 1240 meets EN 397 and ANSI/ISEA Z89.1, with ratchet adjustment and five colours, and the BSH 1230 has a 4-point ratchet and chin strap for climbing. Clear or smoke EN 166 safety glasses cover outdoor work in glare. Arc flash tasks need an arc rated face shield chosen to the same rating as the clothing.
Work at height on poles, towers and gantries
Linemen and tower crews need a full body harness with a work positioning belt. The BFH 0400 is listed to EN 361 and EN 358 with 45 mm polyester webbing. The BRFA 0800 retractable fall arrester (EN 360, 10 m wire rope) suits gantries and tank tops. For cable pits, valve chambers and tanks, the BTP 0900 tripod and BRW 0910 winch make up a confined space rescue set.
Plants: noise, heat and chemicals
- Turbine halls and pump rooms: ear plugs such as the BEP 3011 (SNR 37); corded plugs are easier to keep track of.
- Water treatment and chemical dosing: fully coated nitrile gloves TNG 6004 for oils, acids and alkalis, sealed goggles BSG 0402, and PVC gumboots for wash-down. Chlorine and other gas hazards need specialist respirators.
- Outdoor network crews: mesh hi-vis vests, S1P or S3 safety shoes and traffic cones and barriers for road-side work.
For utility contractors
Network contractors often need to show the utility that PPE matches the approved list. Every product we quote comes with its code and datasheet for that submittal. We deliver across the UAE within 24 hours and supply utility contractors in Abu Dhabi, Saudi Arabia, Kuwait and the rest of the GCC.











