Wet, busy and moving: what port work needs
Ports and shipyards combine three hazards that drive the PPE list: moving vehicles and cranes, wet and oily surfaces, and loads that crush hands and feet. Visibility, grip and toe protection come first. We supply terminal operators, stevedoring contractors, shipyards and ship chandlers around Jebel Ali, Khalifa Port, Hamriyah and the wider GCC.
Be seen on the quay
Every person on a quayside or in a container yard needs high-visibility clothing. For heavy daily wear, a fabric vest such as the BSVF 2000 (120 GSM polyester with zip and pockets) lasts longer than a light mesh vest. For summer shifts, the BSVM 1920 mesh vest is cooler. Cotton coveralls with reflective tape, such as the Supreme Brite BSC 0801, combine workwear and visibility in one garment. Our guide to hi-vis classes under EN ISO 20471 explains when a vest is enough and when the site needs Class 3.
Footwear for wet decks and quays
On decks, ramps and wet quays, choose S3 shoes with a slip-resistant sole. The BFP 2064 is certified S3 to EN ISO 20345:2022, with SRC slip resistance listed in its product data. For fish handling, cold stores and wash-down areas, the BFP 2900 PVC gumboot is waterproof and oil, acid and alkali resistant. It has no steel toe cap, so it should not be used where loads can fall on feet. See all safety shoes.
Gloves for lashing, rigging and cargo
- Lashing and container work: leather rigger gloves such as the BSG 135 or BHG 119 double palm.
- Wet and oily wires and ropes: fully nitrile coated gloves such as the TopSafe TNG 6004.
- Handling with impact risk: BIPG 8000 with TPR back protection, EN 388 4X42C.
- General cargo: sandy nitrile gloves BSW 1458 for grip.
Shipyards and dry docks
Ship repair is mostly hot work, blasting and painting in tight spaces. Welders need FR clothing to EN ISO 11611, such as the Firexe BFRC 0950, with welding gloves, a welding helmet and a welding apron. Painters and blasters need disposable coveralls like the BDCR 2800 and the right respiratory protection for the job; our FFP2, FFP3 and N95 guide explains the filter classes. Tank and double-bottom entry needs a confined space rescue set, such as the BTP 0900 tripod with the BRW 0910 winch.
Work at height and over the side
Crane access, hatch covers, stacking and hull work all need fall protection: EN 361 harnesses such as the BFH 0405 and the BRFA 0800 retractable fall arrester. Note that a harness does not replace a life jacket where there is a risk of falling into water. Life jackets and immersion suits come from marine safety specialists, not from our catalogue.
Noise, heat and the rest
Engine rooms, compressors and grit blasting are loud. The BEP 3011 corded ear plugs carry an SNR of 37 dB. For summer on the quay, see our seasonal PPE guide.
Supplying ships and yards
Ship chandlers and marine service companies can order mixed lots by product code, with datasheets for the vessel's records. We deliver across the UAE within 24 hours, and supply ports and yards in Dammam and Jubail, Jeddah, Qatar and Oman.











