What is the Border Retractable Fall Arrester BRFA 0800 used for?
It is designed for working at height where fall protection is required. The retractable system and automatic locking mechanism help arrest a fall quickly, making it suitable for controlled access tasks on site.
What standard does this fall arrester meet?
It is CE EN 360:2002 certified. EN 360 is the European standard for retractable type fall arresters, which covers products intended to stop or limit a fall through a retracting line system.
What are the main construction details of this fall arrester?
The unit uses a 6 mm galvanised steel cable and has a 10 m length. It weighs 6.10 kg and is finished in orange for better visibility on site.
What user load is this product suitable for?
The maximum user load is 100 kg. That makes it important to confirm the user and equipment combination stays within the stated limit before use.
Can I order the Border Retractable Fall Arrester in bulk?
Yes, bulk and corporate orders are available. You can request a quote through the product page or contact Border PPE Trading LLC by phone or email for procurement enquiries.
What is EN 361 for a full body harness?
EN 361 is the European standard for full body harnesses used in personal fall arrest systems. It covers design, strength and marking, and the fall arrest attachment points on a compliant harness are marked with the letter A. Check the label on the harness itself, not only the paperwork.
When is fall protection required on UAE sites?
Fall protection is needed wherever a worker can fall from height, such as at open edges, floor openings, scaffolds, roofs and ladders. The exact trigger height is set by the project HSE plan and the local authority's OSH rules, and many sites apply it from about 2 m. Collective protection such as guardrails comes first, with harnesses used where those are not practical.
What is the difference between a full body harness and a safety belt?
A full body harness spreads the force of a fall across the thighs, pelvis, chest and shoulders and is the only body holding device allowed for fall arrest. A work positioning or restraint belt to EN 358 holds the worker in place or stops them reaching an edge, but must not be used to arrest a fall.
How often should a safety harness be inspected or replaced?
The user should check the harness before every use. EN 365 calls for a detailed examination by a competent person at least every 12 months, and many UAE sites do it every 6 months because of heat and UV. Replace a harness after any fall, or if the webbing is cut, burned, faded or stiff, or the stitching is damaged.
When should I use a retractable fall arrester instead of a lanyard?
A retractable fall arrester to EN 360 is useful where the worker moves around below an overhead anchor, or where there is not enough clearance for a lanyard with an energy absorber, because it locks quickly and keeps fall distance short. Check the line length, maximum user load and arrest distance against the task.
What equipment is needed for confined space rescue?
A typical rescue setup is an anchor over the opening, such as a tripod to EN 795, a rescue winch or lifting device to EN 1496, and a full body harness on the entrant. The rescue plan, trained standby team and gas testing must be in place before anyone enters.
Tap to enlarge
