Home › Work Suit › FIREX WORK SUIT

FIREX WORK SUIT

Code: BFRS 0951 In stock

The Firex Work Suit BFRS 0951 is a Border work suit made from 100% cotton FR fabric with triple-stitched seams for added durability. It is designed for welding, foundries, flame cutting and electrical utility work, and comes in EN Royal Blue.

See all features
Colour 1 available
EN Royal Blue
Sizes S – 5XL
SMLXL2XL3XL4XL5XL
WhatsApp Datasheet
Category
Work Suit
Brand
Border
Share

Product description

The FIREX Work Suit BFRS 0951 is a Border work suit for body protection in hot-work environments. It is made from 100% Cotton FR with a fabric weight of 210–220 gsm, giving it a practical balance of protection and workwear comfort for daily use.

This work suit uses stud buttons for closure, triple-stitched seams for extra strength, and 1” reflective tape on the shirt and pant for improved visibility. The EN ISO 11611:2015 standard is associated with protective clothing for welding and related processes, while EN ISO 11612:2015 covers clothing for protection against heat and flame.

In plain terms, these standards mean the garment is intended for tasks where exposure to sparks, radiant heat or flame is part of the job. It is suitable for foundries, welding, flame cutting and electrical utilities where protective workwear is required.

The suit is available in sizes S to 5XL and in EN Royal Blue, making it suitable for a wide range of workers and site requirements.

All features

  • 100% Cotton FR fabric
  • 210–220 gsm fabric weight
  • EN ISO 11611:2015
  • EN ISO 11612:2015
  • Triple stitched seams
  • Stud button closure
  • 1” reflective tape on shirt and pant

Technical specifications

Fabric100% Cotton FR
Gsm210–220
ClosureStud buttons
Reflective tape1” (Shirt & Pant)
StitchingTriple stitched
SizesS, M, L, XL, 2XL, 3XL, 4XL, 5XL
ColoursEN Royal Blue

Certifications & standards

EN ISO 11611:2015 EN ISO 11612:2015

Frequently asked questions

What is the FIREX Work Suit BFRS 0951 used for?
The FIREX Work Suit BFRS 0951 is designed for hot-work environments where protective clothing is needed. It is suitable for foundries, welding, flame cutting and electrical utilities.
Which standards does the FIREX Work Suit meet?
It meets EN ISO 11611:2015 and EN ISO 11612:2015. These standards relate to protective clothing for welding and related work, and clothing for protection against heat and flame.
What material is the FIREX Work Suit made from?
The suit is made from 100% Cotton FR fabric. It has a fabric weight of 210–220 gsm and triple-stitched seams for added durability.
What sizes and colour are available for the FIREX Work Suit?
It is available in sizes S to 5XL. The available colour is EN Royal Blue.
Can I request bulk or corporate orders for this work suit?
Yes. Border PPE supports bulk and corporate orders, and you can request a quote through the product page, by phone on +971 54 446 7693, or by email at info@borderppe.ae.
What is the difference between a work suit and a coverall?
A work suit is a two-piece shirt and trouser set, while a coverall is a one-piece garment with a single front closure. Work suits are easier to wear for long shifts and let you replace the shirt or trousers separately. Coveralls give continuous cover and are preferred for dirty, oily or hot work.
Which fabric is best for work uniforms in UAE heat?
100% cotton in the 185-220 GSM range is the most practical for outdoor work in the UAE because it breathes and absorbs sweat. Polyester is lighter and keeps its colour well but holds more heat and can melt near sparks. Heavier 240-270 GSM cotton suits indoor workshops, industrial laundering and the cooler months.
What do mercerized and sanforized mean on a work suit specification?
Mercerizing is a treatment that gives cotton a smoother surface, better strength and better dye uptake. Sanforizing pre-shrinks the fabric so the garment keeps its size after washing. A non-sanforized suit can shrink a little in the first washes, so allow for that when choosing sizes.
Do I need an FR work suit for welding?
Yes, if the work involves sparks, spatter or flame, a normal cotton or polyester suit is not enough. Look for a suit certified to EN ISO 11611 for welding and EN ISO 11612 for heat and flame. Polyester work suits should be kept away from welding and cutting because the fabric can melt.
Are work suits classed as PPE?
Most work suits are general workwear and uniforms, not certified protective clothing. A work suit only counts as PPE for a specific hazard when it is certified to the relevant standard, such as EN ISO 11611 or EN ISO 11612 for heat and flame. Fabric tests such as EN ISO 3801 or EN ISO 12945-2 describe fabric quality, not protection.
Can you supply work uniforms in bulk with our company logo?
Yes. Border Safety Wears offers volume pricing, corporate accounts and custom logo options on work suits. Send your sizes, colours and quantities through Add to quote or WhatsApp on +971 54 446 7693. Delivery is within 24 hours across the UAE.