What is Border Traffic Fence | 50 MTR used for?
Border Traffic Fence | 50 MTR is used for construction sites and road works where a temporary barrier is needed. It helps mark controlled work areas and supports traffic safety applications.
What material is the Traffic Fence | 50 MTR made from?
The Traffic Fence | 50 MTR is made from PE and has a UV-stabilised plastic mesh construction. It is designed as a lightweight mesh fence for temporary site use.
What are the mesh and thickness details of this traffic fence?
This traffic fence has a mesh size of 65×35 mm and a thickness of 0.5 mm. These specifications suit it to temporary barrier use in road safety and construction settings.
What size and colour does Border Traffic Fence | 50 MTR come in?
Border Traffic Fence | 50 MTR is supplied in 1×50 m size and comes in orange. The orange finish helps the fence stand out in work zones.
Can I request a quote for bulk orders of this traffic fence?
Yes. Border PPE Trading LLC accepts bulk and corporate orders, and you can request a quote using the Request Quote button on the product page, by phone at +971 54 446 7693, or by email at info@borderppe.ae.
What size traffic cone do I need for road works?
Cones of 45 to 50 cm suit car parks, warehouses and low-speed internal roads. Cones of 70 to 75 cm are the usual choice for site roads and urban road works, and 100 cm cones are used on faster roads, long tapers and at night. Your approved traffic management plan has the final say on public roads.
How far apart should traffic cones be placed?
Spacing depends on the speed limit, the type of closure and the part of the layout (taper or straight run), and it is set in the traffic management plan and the road authority's work zone manual. Tapers use closer spacing than the straight run, and spacing is usually reduced at night or in poor visibility.
What is the difference between traffic cones, bollards and barriers?
Cones are portable markers for guiding traffic and showing a hazard. Bollards and traffic posts mark lanes or edges for longer periods, and flexible bollards recover after being hit. Barriers such as folding barricades, cone bars and chains physically close off an area to people, but plastic barriers are not built to stop vehicles.
Are reflective cones necessary for night work?
Yes, cones used at night or in low light should carry reflective collars or tape so they show up in vehicle headlights. Many sites also add solar or battery barricade lights on cones and barriers. Replace cones when the reflective band is faded, scratched or dirty.
Do solar traffic lights work well in the UAE?
Solar barricade lights get plenty of daylight to recharge in the UAE, which makes them practical for long-running road works. Dust and sand on the panel reduce charging, so wipe panels during routine site checks and check the lights at dusk.
Where are rubber speed humps and cable protectors used?
Modular rubber speed humps are used to slow vehicles in car parks, schools, private roads and industrial yards, and can be moved if the layout changes. Cable protectors cover cables and hoses that cross vehicle or pedestrian routes, which protects the cables and reduces trip hazards.