What are BORDER BSG 130 Leather Gloves used for?
BORDER BSG 130 Leather Gloves are suited to construction, fabrication, maintenance, warehousing and general industrial operations. They are designed as hand protection for demanding work where durability and grip are important.
What does EN 388:2016 mean for the BSG 130 glove?
EN 388:2016 is a standard for protective gloves against mechanical risks. For the wearer, it means the glove has been assessed for common hazards such as abrasion, cut, tear and puncture in industrial use.
What materials and construction does the BSG 130 use?
The BSG 130 uses a rubber and leather material group with split leather construction and a shoulder split leather cut. It also has a Double Palm Shield Gripper pattern and a Wing Thumb style.
What size and colour is BORDER BSG 130 Leather Gloves available in?
BORDER BSG 130 Leather Gloves are available in size 10 and Grey. If you need to standardise PPE supply for a team, this single size and colour option can help with ordering consistency.
Can I request a quote for BORDER BSG 130 Leather Gloves in bulk?
Yes. Border PPE Trading LLC supports bulk and corporate orders, and you can request a quote using the Request Quote button on the product page. You can also call +971 54 446 7693 or email info@borderppe.ae.
What do the numbers on EN 388 gloves mean?
EN 388:2016 gives four digits and a letter. The digits are abrasion (0 to 4), coupe cut (0 to 5), tear (0 to 4) and puncture (0 to 4), and the letter is the ISO 13997 cut level from A to F. An X means that property was not tested, and a P at the end means the glove passed the impact test.
Is cut level 5 the same as cut level F?
No. Level 5 is the top of the older coupe test scale, which is the second digit in the EN 388 code. Level F is the top of the ISO 13997 scale, shown as the letter, and means the material resisted at least 30 newtons. The two tests work differently, so compare gloves using the letter where it is given.
What cut level do I need?
Your risk assessment decides, but as a rough guide general handling and packing need little cut resistance, while sheet metal, glass and sharp-edged steel generally call for level C or higher. Look at the ISO 13997 letter rather than the coupe digit when comparing cut gloves.
Nitrile or latex coated gloves: which should I choose?
Nitrile coatings hold up well against oil and grease, so they suit maintenance, mechanical and automotive work. Latex coatings are flexible and give strong grip on rough materials such as blocks and timber. Some people are sensitive to natural rubber latex, so nitrile or PU is the safer choice for mixed crews.
Are EN 388 gloves suitable for chemical handling?
Not on the strength of EN 388 alone, as it covers mechanical risks only. Chemical protection is tested under EN ISO 374, so check for that marking and the chemicals listed before using any glove with solvents, acids or alkalis.
Can you supply safety gloves in bulk across the UAE and GCC?
Yes. We supply bulk and repeat glove orders with delivery within 24 hours across the UAE, and ship to Saudi Arabia, Qatar, Oman, Kuwait and Bahrain. Corporate accounts and volume pricing are available, and quotes can be requested through the Add to quote button or WhatsApp.